-3AN Brake & Clutch Line; PTFE Inner Liner with 308 Stainless Steel Braided Outer Cover, Sold by the Foot
$3.37
-3 AN brake and clutch line with high pressure PTFE (Polytetrafluoroethylene) inner liner and 308 stainless steel outer braid, ready for the most demanding motorsports and automotive applications:
- Sold by the foot. Quantity in cart will equal the number of feet.
- 308 Stainless steel braided outer cover for excellent abrasion resistance.
- Recommended for brake, clutch & transmission, power steering, oiling, hydraulic, and vacuum lines.
- Compatible with a wide range of fuels, oils, and most acids and solvents:
- All grades of gasoline including E85 and 110LL, av-gas, alcohol, nitro, methanol, ethanol, isopropyl alcohol, and many more.
- All street and racing glycol-based (DOT 3, DOT 4, DOT 5.1) and silicone-based (DOT 5) brake and clutch fluids.
- Minimum temperature -94°F/ -70℃/ Maximum temperature 482°F/ 250℃.
- Equivalent tubing O.D.: 3/16″ or 0.1875″.
- I.D.: 9/64″, 0.138″, or 3.65mm.
- O.D.: 1/4″, 0.25″, or 6.35mm.
- AN Fitting Thread Size: 3/8″-24.
- Minimum bend radius: 1.5″.
- Rated to 4000 PSI with a burst pressure of 12000psi.
- *Pressure ratings are for hoses properly assembled per instructions using compatible hose end fittings.
- Typically used in FF and F2000 cars for both brake and clutch lines. Common for oil pressure gauge lines too.
- Recommended for drivers looking for the firmest pedal feel.
- Part # 3AN-SS-BRK
See part 3AN-SS-BRK-BLK for same line, but with Black stainless steel outer braid.
Similar and more corrosion resistant 3AN size 308 stainless steel outer braid line that is coated in black vinyl can be found at part # 3AN-SS-BRK-BLKVYN.








