-3AN Brake & Clutch Line; PTFE Inner Liner with Black 308 Stainless Steel Braided Outer Cover, Sold by the Foot

-3 AN brake and clutch line with high pressure PTFE (Polytetrafluoroethylene) inner liner and Black 308 stainless steel outer braid, ready for the most demanding motorsports and automotive applications:

• Sold by the foot. Quantity in cart will equal the number of feet.
• Black 308 Stainless steel braided outer cover for excellent abrasion resistance and a great look
• Recommended for brake, clutch & transmission, power steering, oiling, hydraulic, and vacuum lines.
• Compatible with a wide range of fuels, oils, and most acids and solvents:
  • All grades of gasoline including E85 and 110LL, av-gas, alcohol, nitro, methanol, ethanol, isopropyl alcohol, and many more.
  • All street and racing glycol-based (DOT 3, DOT 4, DOT 5.1) and silicone-based (DOT 5) brake and clutch fluids.
• Minimum temperature -94°F/ -70℃/ Maximum temperature 482°F/ 250℃.
• Equivalent tubing O.D.: 3/16″ or 0.1875″.
• I.D.: 9/64″, 0.138″, or 3.65mm.
• O.D.: 1/4″, 0.25″, or 6.35mm.
• AN Fitting Thread Size: 3/8″-24.
• Minimum bend radius: 1.5″.
• Rated to 4,000 PSI with a burst pressure of 12,000psi.
  • *Pressure ratings are for hoses properly assembled per instructions using compatible hose end fittings.
• Typically used in FF and F2000 cars for both brake and clutch lines. Common for oil pressure gauge lines too.
• Recommended for drivers looking for the firmest pedal feel.
• Part # 3AN-SS-BRK-BLK.

Same -3 AN brake line, but in standard grey colored 308 stainless steel outer braid is part # 3AN-SS-BRK.
Similar and more corrosion resistant 3AN size 308 stainless steel outer braid line that is coated in black vinyl can be found at part # 3AN-SS-BRK-BLKVYN.