AW-3 Female Rod End, #10 or 0.190″ bore, 10-32 RH Female Thread by Aurora (for Throttle Cable)

Genuine Timken Aurora AW-3 female rod end with heavy duty shanks that provide the ultimate in strength, durability, and safety. Aurora rod ends are unsurpassed in motorsports, aviation, aerospace, marine, or industrial use!

• Regarding use for throttle cables:
  • A PTFE-lined rod end can be too stiff for use on a throttle cable, causing a sticky pedal or even premature wear on the cable. These special rod ends are made slightly loose so the cable can pivot freely on the pedal or carburetor linkage.
  • Standard right-hand 10-32 UNF female threads fit most formula car throttle cables.
  • The ball is 5/16″ wide, with a 0.190″ bore to accept a #10 screw. Flats on the body accept a 5/16″ wrench. This rod end will add 0.62″ to the overall length of your throttle cable when screwed all the way in.
• Body, race, and ball are all heat treated alloy steel. The ball is hard chrome plated alloy steel, and the steel race is protective coated for corrosion resistance.
• Thread Type: Right Hand.
• Thread Configuration: Female
• B – Ball Bore: 0.1900 in.
• W – Ball Width: 0.312 in.
• H – Head Width: 0.250 in.
• A – Base to Center: 1.062 in.
• D – Head Diameter: 0.625 in.
• K – Shank Diamter: 0.406 in.
• J – Wrench Flat Width: 0.312 in or 5/16″
• Ball Diameter: 0.437 in.
• C – Thread Depth: 0.562 in.
• Thread Size: 10-32.
• Thread Class: UNF-3B.
• a – Misalignment Angle Clevis Mounted: 13º.
• Ultimate Radial Static Load Capacity: 3,733 lbs. NOTE: This is over twice the capacity of the similar MW-3 rod ends, which only has 1,531 lbs of capacity. 
• Type of Lubrication: None
• Part of the Aurora Bearing AW & AG Series Female Rod Ends
• Specification & Drawings for the AW-3 can be seen by clicking here.