Wilwood 140-14940 Dynapro Radial Mount Big Brake Front Brake Kit (Race) — Honda Civic 1988-2005, Honda CRX 1988-1991, Honda Del Sol 1994-1997, Honda Fit 2007-2013, Acura Integra 1990-2001

Wilwood 140-14940 Dynapro Radial Big Brake Front Brake Kit (Race) – Honda Civic / CRX / Del Sol / Fit / Acura Integra

Wilwood’s Dynapro Radial Big Brake Front Kit (P/N 140-14940) is configured for dedicated road racing on 1990-2001 Acura Integra 4-lug models along with the various Honda Civics, CRXs, Del Sols, and Fits equipped with — or upgraded to — the large-bearing hubs and OE spindles originally designed around 262mm (10.32″) diameter rotors. The four-piston DPR/ST radial mount calipers use a forged-aluminum body with Type III Mil-Spec hard anodizing for superior bore wear resistance, paired with Thermlock pistons and internal damper springs that reduce heat transfer to the pads and fluid for consistent pedal feel over a long stint. An 11.75″ Spec-37 iron GT directional-vane rotor is dynamically mounted to a lightweight forged aluminum hat to minimize unsprung weight while providing strong thermal capacity. The kit bolts to the factory spindle location using premium-grade mounting brackets and fasteners — no modification required — and is completed with high-temperature endurance race pads.

Specifications

Kit Contents

• 2 x Caliper – Dynapro Radial Mount, Type III Anodize: 120-14944 (same part no. both sides)
• 2 x Rotor – GT 36 Curved Vane, Spec-37 Iron, 11.75 x 0.81″: Left Hand 160-12286, Right Hand 160-12285
• 2 x Rotor Hat – Big Brake Dynamic Hat, Flared Bell, 0.900″: 170-14943
• 1 x Brake Pad Set – BP-35, 7816 Plate: 150-35-7816K
• 1 x Hat Bolt Kit: 230-8454
• 1 x Bleed Screw Kit: 220-6069

Important Notes

• This kit requires spindles/hubs originally equipped with 262mm (10.32″) diameter rotors – verify your specific Civic, CRX, Del Sol, Fit, or Integra uses the large-bearing hub before ordering.
• Stainless steel braided flexlines are NOT included with this kit – Wilwood requires the line kit to be ordered separately by exact vehicle fitment. Three options are listed for this application: 220-11790, 220-6420, or 220-6860. Confirm the correct line kit for your specific vehicle with Wilwood tech support before ordering.
• This is a road race kit and contains high-temperature racing pads – extended low-temperature street use will cause premature rotor and pad wear.
• Requires 15″ or larger wheels with additional inside clearance to accommodate the larger-than-stock brake package; always check the wheel clearance diagram before ordering.