Wilwood Forged Narrow Superlite 4R Big Brake Rear Brake Kit (Race) for BMW E36 M3 1995-1999

This brake kit includes everything you need to upgrade your 1995-1999 BMW E36/ M3 rear brake system to a race powerhouse. Perfect for endurance race cars!:

• This kit is configured for dedicated road racing on all 1995-1999 BMW E36/M3 models.
• All emphasis is on improved front to rear balance, high durability, and high efficiency heat management, without adding unnecessary rotating or unsprung weight to the driveline and rear suspension.
• The FNSL4R/ST calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color, hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout.
• Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish.
• Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls.
• The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders.
• Spec37 alloy GT competition series 13.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats.
• As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces.
• Further weight reduction is achieved by accommodating the elimination of the parking brake hardware.
• Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with minor modifications.
• This championship proven system is completed with high temperature, high friction, endurance compound race pads selected specifically by application.
• Stainless steel braided flexlines are included in the kit to complete the installation.
• Comes with BP-35 racing compound brake pads:
  • High friction, good low, medium response that increases with rotor temp
  • Linear feeling pad with smooth response and excellent release characteristics
  • Low-medium pad wear
  • Predictable, consistent pedal feel
  • For use with iron or steel rotors
• Wilwood part number 140-16017

Click here to view Assembly Instructions and included Parts List in detail.

• *This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
• Minimum wheel diameter required: 17″

Calipers
Left Hand – Part No:	120-12603
Right Hand – Part No:	120-12603
Type:	Forged Narrow Superlite 4R
Finish Color:	Type III Anodize
Piston Count:	4
Piston 1 Bore (in):	1.12
Piston 2 Bore (in):	1.12
Piston Area (In²):	1.98
Piston Type:	Thermlock
Mount Type:	Radial
Brake Pad Plate:	7416
Brake Pad Area (In²):	8.2
Brake Pad Volume (In³):	3.8
Pad Compound:	BP-35
Forged Narrow Superlite 4R Caliper – Type III Anodize

Rotors
Left Hand – Part No:	160-15876
Right Hand – Part No:	160-15875
Type:	GT 48 Curved Vane
Style:	GT Slotted
Surface Finish:	Plain
Material:	Spec-37 Iron
Outside Diameter (in):	13.00
Width (in):	1.00
Vane Count:	48 CV
Design Type:	GT
Burnished:	No
Dynamically Balanced:	Yes
GT 48 Curved Vane – Spec-37 Iron – Plain